Repairing Damaged Cedar Siding Using the Festool TS 55

Tuesday, November 16, 2010 | Reader Comments | How-To | Saws

Fast set-up and break-down of material cutting area. 

A contractor who uses Festool recently did some repair of cedar siding for a customer's 5,000 square foot vaction home in Southampton, NY.

Small, patchwork areas of damaged cedar siding needed to be replaced in numerous locations.  This was accomplished more quickly & accurately because they didn’t have to move a cumbersome table saw around the perimeter of the house. Instead, the Festool TS 55 was used to cut/install siding onsite in narrow spaces. New siding was easily measured, cut, and install in individual sections to line up precisely with the original (which is stained grey in the photo) cedar siding.

Read more...

Cutting 1/8" Stainless Steel with the Festool TS 75

Tuesday, November 16, 2010 | Reader Comments | Saws

The versatility to tackle any task with accuracy and ease.

While not a common task, did you know that your Festool TS 75 is capable of cutting stainless steel up to 1/8" in thickness? Be sure to select the appropriate blade for the material you are cutting. Festool offers a wide selection of blades that are designed to cut specific materials. In this case, the 36-tooth metal-cutting blade (495384) was used.

Read more...

The Gnarly Wood Shoppe: A Douglas Fir Conference Table

Friday, December 4, 2009 | Reader Comments | How-To | Reviews | Saws

A Douglas Fir Conference Table


We had a contest a few months ago and asked for customers to submit stories about how the Festool TS plunge saw and guide rail system helped them to work faster, easier and smarter. Well, Mark Schroeder, proprietor of The Gnarly Wood Shoppe, sent in his story about constructing a massive conference room table from Douglas Fir and walnut.

Read more...

Flipping Cool: The Mobile Saw Table by Marte Yerkins

Friday, September 4, 2009 | Reader Comments | How-To | Saws

Mobile Saw Table

 

A special thanks to Marte Yerkins for sharing his project for building a mobile saw table which can be folded for storage. At the bottom of this article, you will have the opportunity to download complete project plans and instructions. Here's what Marte had to say...

Read more...

Choosing A Plunge Cut Saw & Guide Rail System

Sunday, January 4, 2009 | Reader Comments | Guide Rails | Saws

Track Saw Guide

A lot of people still believe you can only get straight, splinter-free cuts in a shop using expensive panel saws, table saws, and CNC equipment. Getting quality cuts with portable power tools doesn't have to be difficult or expensive. The truth is… with the right power tools, anyone can get great results in the shop or on the jobsite. Straight, splinter-free cuts are easy, once you know the secret.

Read more...

Little Known Facts About Festool Guide Rails

Tuesday, November 4, 2008 | Reader Comments | Festool Facts | Guide Rails | Saws

Guide Rail Facts

Obviously the guide rail is one of the main components of the Festool system. As such, we would like to share some things about our guide rails that you may not know.

Read more...

Straight Talkā€¦ About Straight Cuts.

Saturday, October 4, 2008 | Reader Comments | Saws

TS Plunge Saws

There are a lot of people who still believe you can only get straight, splinter-free cuts in a shop using expensive panel saws, table saws, and CNC equipment.  Getting quality cuts with portable power tools doesn’t have to be difficult or expensive.  The truth is…that with the right tools, anyone can get great results in the shop or on the jobsite.   Straight, splinter-free cuts are easy, once you know the secret.

We patented our innovative guide rail system in 1964, and have continuously set new and higher standards for precision cutting with plunge cut saws.  Learn why professionals continue to turn to Festool when they need perfectly straight, splinter-free cuts on both sides of the blade in our new Festool TS Plunge Cut Saw brochure.

Festool's MFT Grows UpDownload a PDF version of the "Festool TS Plunge Cut Saw Brochure." (1MB).

The Eye of the Tornado

Friday, January 4, 2008 | Reader Comments | Saws

Festool Saw Blade Teeth

Did you know that several inconspicuous features on the TS Series Plunge Cut Saws are actually designed to aid in dust extraction, prolonging the life of the tool and creating a cleaner, healthier work environment?

The rectangular opening in the side blade cover is not only for removing the blade, it also serves as an air intake port. The opening allows air to flow into the center of the spinning blade and forced out of the dust port by centrifugal force along with the sawdust. Dust extraction for the TS saws works best if that opening is NOT covered.

To find accessories for your TS Plunge Cut Saw, visit the Festool USA website.